Robotics Technologies Bus-Cam BC 7300 Manuale Utente Scaricare il pdf (Pagina 26)

2626

VT operator terminals ensure maximum availability of drivers and a full coverage of the PLC market and of other

devices, such as drives, inverters and temperature controllers, including:

Allows for communication with MPI devices

(e.g. Siemens® S7 300/400) without an

external adapter. You can also import project

variables directly from the STEP 7 software.

Allows for simultaneous use of two drivers

on the terminal’s 2 serial ports without

adapters, and exchanging data between

multiple devices.

All products are provided with the ESA-Net

network (no additional hardware required),

which allowing you to interconnecting with

up to 32 terminals. Every ESA terminal can,

therefore, read information and collect data

from any PLC or any other device connected

to the network.

The VT family terminals allow for the remote

transfer of the terminal’s projects, recipes

and even rmware by means of a modem.

MPI port

Double Driver

ESA-Net network

Remote management

Probus-DP at 12 Mbit/s (addressing up to 127 terminals)

Interbus-S at 500 Kbit/s (addressing up to 127 terminals)

CAN (through built-in port or external adapter)

Modbus in master and slave mode

TCP/IP protocol support

All ESA products in the VT family comply with CE standards and are c-UL and

UL-us (UL508 CSA C22.2 No. 14-M95), ATEX (Zone 2/22, category 3 G/D) and

RINA certied, thereby ensuring total system safety and protection.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Nessun commento

Robotics Technologies Bus-Cam BC 7300 Manuale Utente Pagina 26